Quick and easy to install
Fix to any surface
Remove and reinstall protective sheets in seconds
Can be installed vertically or horizontally
SheetMate is the first and only reusable fixing method for protective sheets, so will save both time and money throughout one project and into the next. SheetMate is fully recyclable, meaning you will no longer have to fill up landfill sites with endless rolls of adhesive tape.
Fix the SheetMate base into position ensuring the wall spacer is facing the wall.
Place your preferred protection over the SheetMate base
Fasten the top section of your SheetMate onto the base by applying pressure until the top section is fully engaged with the base and pull the covering taut along the wall.
Release the top section of the SheetMate from the base by compressing the raised grips together.
Remove your preferred protection.
Remove the base for reuse if the project is finished, or leave it in place for quick and easy re-installation if required.
Screw the base into the surface using either of the fixing holes on the SheetMate base. The fixing locations can be used for unfinished surfaces such as joists, screeds, scaffolding, etc or into discreet locations on finished surfaces.
Bond the base using the hook and loop pads to finished surfaces such as tiled floors and walls, kitchens, bathrooms etc…
Bond the base using hot melt glue (glue guns) to finished surfaces.
Secure the base into the ground. using steel pegs where external landscapes need protection.
always test an area that is not visible before using any adhesives/adhesive pads.
There are no reviews yet.